Benefits of RAID arrays: which one to choose?

Here you will find out:

• what are the benefits of the different RAID

• what are the difference in various RAID arrays

Are you ready? Let's read!

What is the purpose of RAID?

To increase the dependability of data storage, numerous hard drives (more and more solid-state drives are increasingly being utilized) are joined into a RAID array, which is a redundant array of independent disks. You can gain better performance, write speed, read speed, fault tolerance, and data redundancy to varying degrees depending on how your disk array is setup. Each of these array alternatives has a distinct priority function, and the many tiers of these configurations are labeled with different numbers: 1, 2, 10, 5, etc.

It should be concluded that the use of RAID is much more convenient and efficient than using a single disk in the system, so they are widely used not only in the manufacturing sector, but also by individual users.

RAID (Redundant Array of Inexpensive Disks) is a storage system in which two or more disks are physically connected together to form a single logical, big capacity storage device.

• greater efficiency

• enhanced resilience

• lower prices

There are several RAID levels, each of which focuses on one or more of these benefits, either separately or in combination. The following are the two main approaches used: striping and reversing.

The method of striping is used to improve performance. It is a way of creating a huge virtual drive by mapping data across the actual drives in an array. The data is separated into stripes or segments, which are written sequentially across the array's disks.

Mirroring was the first true RAID system, requiring two identically sized individual drives. The active drive is the primary drive, and the mirror drive is the secondary drive. The technology provides basic data redundancy by automatically sending data to the mirror drive when it is written to the active disk.

We're using RAID 1 to boost resiliency in this case. Even while hard disk head failures are rather uncommon these days, they may still be disastrous when they happen. How many users back up their user data on a regular basis? Indeed, given the size of today's hard drives, how feasible is it to implement a traditional data backup regime using tape or removable disk media?

RAID 1 provides a straightforward and cost-effective solution. If a disk fails, the RAID controller will simply utilize the mirror drive to retrieve data and keep the system running. To restore the previous degree of resilience, you'll need to replace the dead disk, but you won't have lost any of your critical user data!

Advantages of RAID in different levels

Let's look at the most common arrays and the main advantages of RAID:

RAID 0 - An array of 2-4 disks (possibly more, but rarely used) that uses striping for data distribution. Therefore, the disk capacity is fully utilized, but as a result, the array has no redundancy. If even one disk gets damaged, you will lose all information - there is no fault tolerance. The main benefits of RAID are improved performance and no overhead. Therefore, it can be easily used, but do not forget about periodic data backups.

RAID 1 - Provides excellent read and write speeds by distributing information by mirroring. At the same time, you “lose” the volume of the second hard disk (it is used to write a full (byte) copy of the first hard disk to it), but you get fault tolerance and reliability. Replacing a damaged disk is possible only after turning off the computer, and for servers with a large number of computers, this is not convenient.

RAID 2 - Uses error correction coding and is the only original RAID level not currently in use.

RAID 3 - Uses bit-striped parity and does not perform well with a large number of small data requests. Nowadays, it is very rarely used.

RAID 4 - Uses a dedicated disk with parity so it can be used for sequential data access and provides good random read performance. Random write performance is poor due to the need to write all parity data to one disk.

RAID 5 - Uses striped parity. In this case, you need at least three disks, one of which will store duplicate information. Recovery, in turn, may take several days, in addition, productivity will increase, but only slightly.

RAID 6 is an extension of RAID 5 and uses double parity. When using this technology, even the failure of two hard drives in one group at once will not lead to data loss, while the recovery time also increases due to the complex mechanism of operation.

RAID 10 (1 + 0) - Combines RAID 1 mirroring with RAID 0 striping. In turn, this contributes to the security of the array and high performance. Expect to pay big bucks for good read and write performance.

RAID 50 (5 + 0) - Contributes to high data transfer rates as well as request processing and good speed. This array requires at least six disks, so generally only large corporations can afford the expense and implementation.

RAID 60 (6 + 0) - You will get good fault tolerance and fairly fast data transfer, eight or more disks are already needed here. Draw your own conclusion.

5 Top Advantages of Common RAID Systems

1. Large Storage

To begin with, one of the most obvious benefits is that a RAID has far more storage capacity than a single drive. RAID arrays are known to be made up of two or more disks. In addition, if you need more storage, you can simply add another hard drive to the array. It appears to be rather practical.

2. Fault Tolerance

Data backup in the array is created automatically in most RAID levels. This is accomplished by RAID data parity, also known as data redundancy. Furthermore, the RAID system becomes fault resilient in this manner. Many people regard RAID as a backup because of this functionality. On the other hand, data loss on RAID systems does happen from time to time.

3. Continuous System Running

If the hard disk on a computer with only one hard drive dies, the operating system will immediately shut down. In a RAID array, however, if a hard drive fails, the system can continue to function properly for a period of time. Users can utilize this opportunity to replace the failing drive with a new one that is more suited.

4. Parity Check

Furthermore, contemporary RAID has an incredibly useful and effective feature called parity check. This function may detect and alert you about any probable system crashes. At that point, you should try to figure out what's causing the problems and address them as quickly as possible.

5. Fast Speed

Finally, compared to a single disk, RAID solutions can function significantly quicker. It's because reading and writing data in an array may be done at the same time. As a result, the transmission rate has increased. Users can improve the performance of their hard drives.